Content: 180 g
Surfactants (12%, arkanoiloxybenzensulfone acid sodium), foaming agents (sodium percarbonate), alkaline agents (carbonate), Rust prevention goods, stabilizing agents
● The foaming component of dense enzyme penetrates to the gap of the washing tank and removes dirt.
● Just put it in the washing tank that has water!
● It can clean and disinfect mold, water red of the back side of washing tank.
● Deodorant smell is also refreshing unpleasant! !
● Can be used for both stainless steel and plastic tanks. (Drum type washing machine, two tank type washing machine can not be used because it can not be added every time)
● Even large capacity washing tank is sufficiently effective at 180g. / cate70024
How to use
(1) Apply lukewarm water (water) to high water level.
(2) Cut the tip of the soaking mouth along the dotted line and put a total of 180 g.
(3) Dissolve for 2 to 3 minutes and leave for about 2 hours.
(4) From the state as it is, drive on the standard course. The accumulated dirt on the rinse water and scrap removal nets shows the effect.
・ It is effective to use lukewarm water (about 40 degrees)
・ If dirt remains in the tank after use, rinse with 1-2 times standard course further.
・ If the product is used for the first time or is heavily soiled, it can not be removed in a single use and may continue to be soiled. At that time, please use the washing tank highter again.
・ Do not put in laundry while using this product. Clothing may be discolored.